⚙Differential

Image
⚙Differential When a car is going straight, the left and right wheels rotate at the same speed. Rotation rate is usually expressed in rpm (revolutions per minute). rpm tells you how many revolutions per minute. At 500rpm, it is considered to be 500 revolutions per minute. Larger generators run at 1500rpm to produce a frequency of 50Hz. Excavator side panels work at 1800rpm. The left and right wheels rotate at the same speed as the car is moving When turning, the left and right wheels do not rotate at the same speed. When turning left, the left wheel spins slowly and the right wheel spins fast. When you turn right, the right wheel slows down and the left wheel spins fast. If both left and right wheels rotate at the same rpm, there is no way to turn. Due to this, it is not possible to connect the left and right wheels with the same shaft. Let me give you an example of a rear-wheel-drive car. In the rear seat, the front wheel is not connected to the engine. The power of the engine is...

Here are five things you should never do with auto gear.

Here are five things you should never do with auto gear.
1. If the auto gear is about to hit Parking (P), apply the brakes completely and stop. Pressing P is like locking the transmission. A locking pin locks between the gears of the #transmission gear. If you hit P without stopping, the lock pin may break.

2. As mentioned above, the auto gear must be shifted from reverse (R) to drive (D) or D (R) to be applied only after the car brakes and stops. This is when parking. You need to be careful when getting in and out of a car. If you push R while moving in front of the car or push D back while moving, the transmission will be damaged. This means that the transmission has to do the braking work because you have to change gears after parking.
3. Do not neutralize on hills. Taxi drivers usually do it. As a poor country like ours, there is nothing wrong with free shipping on land to save fuel. Even in the United States, 15 states have passed land-shifting gear laws. Landing on the N is fuel efficient, but the car is no longer in full control. It is not safe to shoot manual cars for free. The car computer ECU knows that it is parked at N, so it does not refuel at the speed of the car. It consumes less oil but reduces the lubrication required for transmission and can be damaged by friction inside the gearbox. Later cars had automatic fuel injection technology, even when going downhill with a D.
4. Similarly, do not hit N while waiting at traffic lights. It is true that it consumes less fuel than waiting with D and braking at the headlights, but when you forget that the light is green and you step N and lever, the car will not move and the engine will start to emit. Plus, you'll be getting rid of clutter you don't need.

5. And last but not least, the headline made you read "Fast & Furious" and get off your gear at N before leaving. Finally, the rapid launch of the rocket D causes the transmission bands to erode as quickly as possible. The transmission band is a steel bracelet that attaches to the gearbox between the engine and the transmission. In gear N, the gearbox on the transmission side is pulled by the band and the engine side (the impeller side of the torque converter) is rotating. As soon as the lever is depressed and the D is aligned, the bands eroded when the gearbox was pulled by the band at high rpm. Behind your system malfunctions and a couple of oil spills can cause major gearbox repairs.
Photo from google
Credit : Lin Htet (Engineering Explained)

Comments

Popular posts from this blog

About Oxygen Sensor

Four wheel drive (4WD)